美女胸被狂揉扒开吃奶的网站o_亚洲日韩av中文无码专区_东京热激情无码专区_久久HEZYO久综合亚洲色_欧美成人高清视频_国产精品乡下勾搭老头_欧美一级v片在线播放_成人午夜国产视频_男女猛烈无遮挡免费动态图_亚洲一区国产精品视频

高手還沒有出現(xiàn)��？

版主，我想申請(qǐng)你來(lái)幫忙啦！

UNDERWRITERS LABORATORIES INC.              APPLIANCE WIRING MATERIAL

Subj. 758     Section 2     Page 20624       Issued:   1989-09-20

                                Revised:   2003-11-14

Style 20624       Insulated Flat Cable. ______________________________________________________________________________

Rating     80°C, 60 Volts. ______________________________________________________________________________

Conductor     2-150, material not specified.  40-12 AWG flat or round

           conductors.  Straight or irregular parallel in one plane.

           Flat conductors 1.0 - 10.0 mils thick, 10-100 mils wide.

______________________________________________________________________________

*Insulation       (1)  PVC, 3.5 mils minimum bonded each side, or

           (2)  0.8 mil minimum biaxially oriented PETP

                film bonded each side with 0.5 mil polyester adhesive

                         or

           (3)  0.8 mils minimum PETP film or flame retardant

                polyester film and 0.5 mil minimum PVC on each side

                of conductors laminated together.  10 mils minimum

                edge width and 3 mils minimum between conductors.

           (4)  0.8 mils minimum polyimide film bonded on each side

                of conductors with 0.4 mil minimum polyester

                adhesive.  Total combined thickness shall be 1.2 mils

                minimum.

______________________________________________________________________________

Shield     (Optional) Metal faced polyester tape.

           Drain wire optional.

______________________________________________________________________________

Standard      Appliance Wiring Material UL 758.

______________________________________________________________________________

Instructions  Detailed Examination.

to UL         Flexing - flatwise into a U-bend around a 1/8 in.

Representative       diameter mandrel.

*          Spark Test.

______________________________________________________________________________

UL         (4)  Detailed Examination.

Counter-Check (4)  Flexing - Conditioned 7 days in air oven at 113°C,

Program            then flexed as above.

*          (12) Horizontal Flame Test.

______________________________________________________________________________

Marking       General. ______________________________________________________________________________

Use        Internal wiring of Class 2 circuits in electronic

           equipment.

此款線材加工工藝跟普通電子線加工工藝有很大的差異吧！