1
2
也就是一根芯線或單線,旋轉一周后,測量其兩點直線距離,
3
說的不是很好,請找些絞線書籍看一下絞線的理論知識,或直接請教工人
4
ZHANGTAOC:
也就是一根芯線或單線,旋轉一周后,測量其兩點直線距離,
芯線是線芯嗎?線芯絞距和外圍絞距科是不一樣的
5
Aspecimen of approximately four to six feet in length shall be cut from thesample coil or reel. The specimen shall be tightly secured, at both ends, tothe work surface before the window is cut, to ensure that the conductors cannot untwist. A “window”, exposing the conductor assembly, shall be cut in thejacket, while leaving at least 12 inches (300 mm) of the jacket intact at bothends. The window shall be approximately 1/4 of the circumference in width andapproximately one inch (25 mm) longer than twice the maximum required laylength for the sample. e.g. for a 3-conductor, 18 AWG cord (which has a max.lay of 2-1/4 inches or 57 mm), the window is:
2 (2-1/4) + 1 = approx. 5-1/2 inches long, or
2 (57) + 25 = approx. 139 mm
6
絞距是芯線或銅線旋轉一圈后的直線距離,
或旋轉十圈后的直線長度除以十,為絞距,通常采用此中方法測量.
7
8
9
學習了
10
銅絲是絞合導體中其中一條銅絲同一方向環繞導體一周的距離。UL通常是測量10倍絞距。除以10. 測試方法就是在導體上剝離一條單絲,用手松開單絲,退繞導體10圈,上面有一絞路很清楚的,測量10個距離就行。
芯線其實也一樣,但芯線更好測量,芯線有顏色,你找一個單色,同一方向環繞一圈后這條線出現的距離就是!!可以取平均數。比銅芯更好測量。
11
12
厲害