1
2
WIRING HARNESSES RECOGNITION MARKS
電線接插件認可標簽
Form 1-N -- This Recognition Mark is used for harnesses consisting offour parts or less. Each piece of wire, fitting, splice, terminal block, wiring device,etc. is considered to be a part. Simple terminations of the eyelet, ring, openspade or quick-connect types are not counted as a part when determining theform label to be used. One of the four (or less) parts may be a Listed powersupply cord.
形式 1-N - 這種認可標簽用于包含了四個或少于四個部件的接插件,每一電線,裝配附件,接頭,接線盒,連線設備等都看作是一個部件. 簡單的端子比如針眼型,環型, 開口鏟型或快接型端子, 在決定標簽的形式時,都不作為一個部件計算在內. 這四個(或少于四個) 的部件之一可能是列名的電源線.
Form N -- This Recognition Mark is used for harnesses having morethan four parts as described above. The harness may include as one of the partsa Listed power supply cord.
形式 N - 這種認可標簽用于包含多于上述的四個部件的接插件.這種接插件可能包括列名電源線作為其中的一個部件.
Form 1-T -- This Recognition Mark is used for harnesses consisting offour parts (or less) as described above, using as one of the parts, a power supplycord which has not been previously Listed and, therefore, must be subjected tothe tests prescribed for a power supply cord.
形式 1-T - 這種認可標簽用于包含上述四個(或少于四個)部件的接插件, 使用未經列名的電源線作為其中一個部件, 因此必須首先經過電源線的測試.
Form T -- This Recognition Mark is used for harnesses having morethan four parts as described above and having as one of the parts a powersupply cord which has not been previously Listed and must, therefore, besubjected to the tests prescribed for a power supply cord.
形式 T - 這種認可標簽用于包含多于上述的四個部件的接插件, 并且使用未經列名的電源線作為其中一個部件, 因此必須首先經過電源線的測試.
3
路過,,學習 了,謝謝樓主的分享!
4
從哪個標準可以找到這個解釋?個人想仔細研讀研讀!